- HyperX
Low latency for exceptional DDR4 performance - An unbeatable combination of fast speeds and aggressive timings to complement Intel's 2, 4, 6 or 8 core processors.
Optimized for Intel's Z170 and X99 chipsets - Built-in Intel XMP profiles allow users to easily overclock their platforms by simply selecting a profile, with no need for manual timing adjustments in BIOS.
Lower power consumption compared to DDR3 - HyperX Savage DDR4's lower power requirement means less heat and higher reliability.
Die-cast aluminum heat spreader - die-cast aluminum heat spreader features an asymmetrical design a diamond cut finish. It provides enhanced thermal dissipation for improved reliability, and low profile.
Out of Stock (Affiliate link disclosure)
* Product prices and availability are subject to change frequently. Any price and availability information displayed on Amazon at the time of purchase will apply.| Model | HX421C13SBK4/16 |
| Release Date |
September 2015
* First availability for purchase, it may not correspond to the actual market launch date. |
| Type | 288-pin DIMM |
| Speed | DDR4-2133MHz |
| Size | 16GB (4 x 4GB) |
| CAS Latency | 13 |
| Voltage | 1.20V |
| Heat Spreader | |
| ECC Support |
Series: SX8200 Pro
Capacity: 512GB
Interface: M.2 (M)
NVME:
Form Factor: M.2-2280
SSD Controller: SMI
Max Sequential Read: Up to 3500 MB/s
Max Sequential Write: Up to 2300 MB/s
MTBF: 2,000,000 hours
Wattage: 750W
Type: ATX
Modular: Full
Efficiency: 80+ Gold
PCI-Express 6+2 Pin Connectors: 6
CPU/EPS Connectors: 2
SATA Connectors: 10
Molex Connectors: 4
Series: AMD Radeon RX 5700 Series
GPU Interface: PCIe x16
GPU Chipset: Radeon RX 5700 XT
GPU Memory Size: 8GB
GPU Memory Type: GDDR6
GPU Memory Interface: 256-Bit
GPU Clock Rate: 1605MHz
GPU Boost Clock Rate: 1905MHz
DirectX: DirectX 12
OpenGL: OpenGL 4.5
TDP: 225W
Length: 230mm
Cooling Type: 2 Fans
Power Connectors: 1 PCIe 8-pin + 1 PCIe 6-pin
SLI Support:
CrossFire Support:
DVI-D (Dual Link): 0
DVI-I (Dual Link): 0
DisplayPort: 3
HDMI: 1
G-SYNC Support:
FreeSync Support:
Expansion slots required: 2
