Kingston HyperX FURY 16GB (2x8GB) 2666Mhz DDR4 CL15 Review & Specifications

Kingston HyperX FURY 16GB (2x8GB) 2666Mhz DDR4 Non-ECC CL15 HX426C15FBK2/16

- Kingston

is a kit of two 1G x 64-bit (8GB)
DDR4-2666 CL15 SDRAM (Synchronous DRAM) 2Rx8, memory
module, based on sixteen 512M x 8-bit FBGA components per
Each module kit supports Intel® Extreme Memory
Profiles (Intel® XMP) 2.0.
Total kit capacity is 16GB. Each
module has been tested to run at DDR4-2666 at a low latency timing
of 15-17-17 at 1.2V.

Specs Overview

Model HX426C15FBK2/16
Release Date August 2015
Type 288-pin DIMM
Speed DDR4-2666MHz
Size 16GB (2 x 8GB)
CAS Latency 15
Voltage 1.20V
Heat Spreader

Score Pangoly


Buy now

Out of Stock

* Product prices and availability are subject to change frequently. Any price and availability information displayed on Amazon at the time of purchase will apply.


JEDEC/PnP: DDR4-2666 CL15-17-17 @1.2V

DDR4-2400 CL14-16-16 @1.2V

DDR4-2133 CL12-14-14 @1.2V

XMP Profile #1: DDR4-2666 CL15-17-17 @1.2V

• Power Supply: VDD = 1.2V Typical

• VDDQ = 1.2V Typical

• VPP - 2.5V Typical

• VDDSPD = 2.2V to 3.6V

• Nominal and dynamic on-die termination (ODT) for

data, strobe, and mask signals

• Low-power auto self refresh (LPASR)

• Data bus inversion (DBI) for data bus

• On-die VREFDQ generation and calibration

• Dual-rank

• On-board I2 serial presence-detect (SPD) EEPROM

• 16 internal banks; 4 groups of 4 banks each

• Fixed burst chop (BC) of 4 and burst length (BL) of 8

via the mode register set (MRS)

• Selectable BC4 or BL8 on-the-fly (OTF)

• Fly-by topology

• Terminated control command and address bus

• Height 1.340” (34.04mm), w/heatsink

My comparisons


    $200 $199
    View all PC parts deals ►