Kingston HyperX FURY 8GB (2x4GB) 2400Mhz DDR4 Review & Specifications

Kingston HyperX FURY 8GB (2x4GB) 2400Mhz DDR4 Non-ECC CL15 HX424C15FBK2/8

- Kingston

Price Alert

$
4GB DDR4 2133MHz $58.97
8GB DDR4 2133MHz $129.89
8GB Kit (2 x 4GB) DDR4 2133MHz $75.99
Prime Eligible Item
16GB DDR4 2133MHz $165.45
16GB Kit (4 x 4GB) DDR4 2133MHz $198.75
32GB Kit (2 x 16GB) DDR4 2133MHz $498.00
4GB DDR4 2400MHz $54.25

HyperX
HX424C15FBK2/8
is a kit of two 512M x 64-bit (4GB)
DDR4-2400 CL15 SDRAM (Synchronous DRAM) 1Rx8, memory
module, based on eight 512M x 8-bit FBGA components per
module.
Each module kit supports Intel® Extreme Memory
Profiles (Intel® XMP) 2.0.
Total kit capacity is 8GB. Each
module has been tested to run at DDR4-2400 at a low latency
timing of 15-15-15 at 1.2V.

Specs Overview

Model HX424C15FBK2/8
Type 288-pin DIMM
Speed DDR4-2400MHz
Size 8GB (2 x 4GB)
CAS Latency 15
Voltage 1.20V
Heat Spreader

Score Pangoly

84

JEDEC/XMP TIMING PARAMETERS

JEDEC/PnP: DDR4-2400 CL15-15-15 @1.2V

DDR4-2133 CL14-14-14 @1.2V

XMP Profile #1: DDR4-2400 CL15-15-15 @1.2V

• Power Supply: VDD = 1.2V Typical

• VDDQ = 1.2V Typical

• VPP - 2.5V Typical

• VDDSPD = 2.2V to 3.6V

• Nominal and dynamic on-die termination (ODT) for

data, strobe, and mask signals

• Low-power auto self refresh (LPASR)

• Data bus inversion (DBI) for data bus

• On-die VREFDQ generation and calibration

• Single-rank

• On-board I2 serial presence-detect (SPD) EEPROM

• 16 internal banks; 4 groups of 4 banks each

• Fixed burst chop (BC) of 4 and burst length (BL) of 8

via the mode register set (MRS)

• Selectable BC4 or BL8 on-the-fly (OTF)

• Fly-by topology

• Terminated control command and address bus

• Height 1.340” (34.04mm), w/heatsink

My comparisons

    Spotlight

    $80 $55
    View all PC parts deals ►