- Kingston
HyperX HX426C13SBK2/8 is a kit of two 512M x 64-bit (4GB)
DDR4-2666 CL13 SDRAM (Synchronous DRAM) 1Rx8, memory
modules, based on eight 512M x 8-bit FBGA components per
module. Total kit capacity is 8GB.
Each module supports
Intel® XMP (Extreme Memory Profiles).
Each module has
been tested to run at DDR4-2666 at a low latency timing of
13-14-14 at 1.35V.
Model | HX426C13SBK2/8 |
Release Date |
September 2015
* First availability for purchase, it may not correspond to the actual market launch date. |
Type | 288-pin DIMM |
Speed | DDR4-2666MHz |
Size | 8GB (2 x 4GB) |
CAS Latency | 13 |
Voltage | 1.35V |
Heat Spreader | |
ECC Support | |
Samsung B-Die | - |
XMP TIMING PARAMETERS
•
JEDEC: DDR4-2133 CL15-15-15 @1.2V
•
XMP Profile #1: DDR4-2666 CL13-14-14 @1.35V
•
XMP Profile #2: DDR4-2400 CL13-13-13 @1.35V
• Power Supply: VDD = 1.2V Typical
• VDDQ = 1.2V Typical
• VPP - 2.5V Typical
• VDDSPD = 2.25V to 3.6V
• On-Die termination (ODT)
• 16 internal banks; 4 groups of 4 banks each
• Bi-Directional Differential Data Strobe
• 8 bit pre-fetch
• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)
• Height 1.36” (34.57mm)