Home gaming pc by ErdalA

There was an issue with the second ventilator (the one that is on the side of the cooler) of the Noctua NH-D15 cooler. The ventilator it hits the USB 3 cable and the 24 pin power supply cable on the motherboard. It is necessary to bend the connection cables in a not very comfortable position. I will see if this bending will affect in time the build. Even with the cable bended the ventilator is touching the lateral panel, and to be seen in the future if this will affect the noise of the ventilator. Secondly, the cables from the PSU (Corsair SFX format SF750w) to the motherboard are too short to be routed from the back side where should be there place, so I could not hide them. This type of PSU is more appropriate for a SFF case, where you do not need so long cables.