Configurazione PC Venerdì 13 Ottobre 2023 💵 $2852 🔌 440 W
ErdalA

Home gaming pc di ErdalA

Are you visiting from United States? Go to the United States US site.

⚠️ ATTENZIONE

  • Con alcune schede madri Mini-ITX potrebbero sorgere dei problemi di compatibilità con dissipatori o water block di grandi dimensioni a causa dei dissipatori VRM / placche di metallo e lo spazio disponibile ridotto. Sfortunatamente tali problemi non è possibile identificarli in modo automatico, per questo motivo l'unico modo per conoscere in anticipo le possibili incompatibilità è verificare direttamente con il produttore della scheda madre o del dissipatore.
  • Potrebbe essere necessario un kit di montaggio da SFX a ATX per installare CORSAIR SF750 750W all'interno del case. Scegli un alimentatore ATX se possibile.
Questa configurazione è stata creata usando (US) come regione per i prezzi e disponibilità. (Cambia regione)
Tipo Prodotto Venditore Prezzo Spedizione
Scheda Madre -
CPU -
Dissipatore per CPU -
RAM +Spedizione gratuita
Scheda Video -
Alimentatore +Spedizione gratuita
Case -
SSD +Spedizione gratuita
SSD +Spedizione gratuita
🔌
440 W
Consumo stimato
💵
$2851,90
Totale Build

* Pangoly potrebbe guadagnare una commissione quando utilizzi uno dei link per effettuare un acquisto. (Disclosure)

Hai trovato una informazione non corretta su questa pagina? Contattaci e risolveremo il problema nel minor tempo possibile.
DISCLAIMER: Non tutti i controlli di compatibilità possono essere eseguiti in automatico. Alcune restrizioni fisiche tra i componenti, come per esempio l'altezza dei dissipatori delle RAM / VRM o lo spessore dei radiatori, vanno controllate manualmente.

🚀 Performance

CPU Single-Core
63%
CPU Multi-Core
14%
CPU Gaming
54%
GPU Gaming
28%

📝 Descrizione

There was an issue with the second ventilator (the one that is on the side of the cooler) of the Noctua NH-D15 cooler. The ventilator it hits the USB 3 cable and the 24 pin power supply cable on the motherboard. It is necessary to bend the connection cables in a not very comfortable position. I will see if this bending will affect in time the build. Even with the cable bended the ventilator is touching the lateral panel, and to be seen in the future if this will affect the noise of the ventilator. Secondly, the cables from the PSU (Corsair SFX format SF750w) to the motherboard are too short to be routed from the back side where should be there place, so I could not hide them. This type of PSU is more appropriate for a SFF case, where you do not need so long cables.


💬 Lascia un commento

Formatting help

x