Kingston HyperX FURY 16GB (2x8GB) 2400Mhz DDR4 CL12

Kingston HyperX FURY 16GB (2x8GB) 2400Mhz DDR4 Non-ECC CL12 HX424C12SBK2/16

Kingston HyperX FURY 16GB (2x8GB) 2400Mhz DDR4 Non-ECC CL12 HX424C12SBK2/16

★★★★★
(7 reviews)
Seller Price Buy
Out of Stock
$95.99
+Free shipping
Buy
-
Buy

* Pangoly may earn a commission when you use one of the links to make a purchase. (Disclosure)

* Product prices and availability are subject to change frequently. Any price and availability information displayed on Amazon at the time of purchase will apply.
Price Alert

$

Price alerts are not available for Amazon.

  • HyperX HX424C12SBK2/16 is a kit of two 1G x 64-bit (8GB)
  • DDR4-2400 CL12 SDRAM (Synchronous DRAM) 2Rx8, memory
  • modules, based on sixteen 512M x 8-bit FBGA components per
  • module. Total kit capacity is 16GB.
  • Each module supports
  • Intel XMP (Extreme Memory Profiles).
  • Each module has
  • been tested to run at DDR4-2400 at a low latency timing of
  • 12-13-13 at 1.35V.
  • The SPDs are programmed to JEDEC
  • standard latency DDR4-2133 timing of 15-15-15 at 1.2V.

Specifications Overview

Model HX424C12SBK2/16
Release Date September 2015

* First availability for purchase, it may not correspond to the actual market launch date.

Type 288-pin DIMM DDR4
Speed DDR4-2400 MHz
Size 16GB (2 x 8GB)
CAS Latency 12
First Word Latency 10 ns
Voltage 1.35 V
Heat Spreader
ECC Support

RAM First Word Latency Table (nanoseconds)

Latency is measured in nanoseconds, which is a combination of frequency and CAS. Both frequency increases and latency decreases result in better system performance (when latency is the same, always prefer higher frequency if possible).

Frequency (MT/s)

2133 2400 2666 2800 2933 3000 3200 3300 3333 3400 3466 3600 3666 3733
12 11.25 10.00 9.00 8.57 8.18 8.00 7.50 7.27 7.20 7.06 6.92 6.67 6.55 6.43
13 12.19 10.83 9.75 9.29 8.86 8.67 8.13 7.88 7.80 7.65 7.50 7.22 7.09 6.96
14 13.13 11.67 10.50 10.00 9.55 9.33 8.75 8.48 8.40 8.24 8.08 7.78 7.64 7.50
15 14.06 12.50 11.25 10.71 10.23 10.00 9.38 9.09 9.00 8.82 8.66 8.33 8.18 8.04
16 15.00 13.33 12.00 11.43 10.91 10.67 10.00 9.70 9.60 9.41 9.23 8.89 8.73 8.57
17 15.94 14.17 12.75 12.14 11.59 11.33 10.63 10.30 10.20 10.00 9.81 9.44 9.27 9.11
18 16.88 15.00 13.50 12.86 12.27 12.00 11.25 10.91 10.80 10.59 10.39 10.00 9.82 9.64
19 17.82 15.83 14.25 13.57 12.96 12.67 11.88 11.52 11.40 11.18 10.96 10.56 10.37 10.18
20 18.75 16.67 15.00 14.29 13.64 13.33 12.50 12.12 12.00 11.76 11.54 11.11 10.91 10.72
21 19.69 17.50 15.75 15.00 14.32 14.00 13.13 12.73 12.60 12.35 12.12 11.67 11.46 11.25
22 20.63 18.33 16.50 15.71 15.00 14.67 13.75 13.33 13.20 12.94 12.69 12.22 12.00 11.79
23 21.57 19.17 17.25 16.43 15.68 15.33 14.38 13.94 13.80 13.53 13.27 12.78 12.55 12.32
24 22.50 20.00 18.00 17.14 16.37 16.00 15.00 14.55 14.40 14.12 13.85 13.33 13.09 12.86
25 23.44 20.83 18.75 17.86 17.05 16.67 15.63 15.15 15.00 14.71 14.43 13.89 13.64 13.39
CAS (clock cycles) Lower latency means faster memory.

Cheapest alternatives with equal or better performance

Description

XMP TIMING PARAMETERS

JEDEC: DDR4-2133 CL15-15-15 @1.2V

XMP Profile #1: DDR4-2400 CL12-13-13 @1.35V

XMP Profile #2: DDR4-2133 CL13-13-13 @1.2V

• Power Supply: VDD = 1.2V Typical

• VDDQ = 1.2V Typical

• VPP - 2.5V Typical

• VDDSPD = 2.25V to 3.6V

• On-Die termination (ODT)

• 16 internal banks; 4 groups of 4 banks each

• Bi-Directional Differential Data Strobe

• 8 bit pre-fetch

• Burst Length (BL) switch on-the-fly BL8 or BC4(Burst Chop)

• Height 1.36” (34.57mm)



Compare Kingston HyperX FURY 16GB (2x8GB) 2400Mhz DDR4 CL12 with similar Memory




View more comparisons ►

x