Kingston HyperX FURY 8GB (2x4GB) 2400Mhz DDR4

Kingston HyperX FURY 8GB (2x4GB) 2400Mhz DDR4 Non-ECC CL15 HX424C15FBK2/8

Kingston HyperX FURY 8GB (2x4GB) 2400Mhz DDR4 Non-ECC CL15 HX424C15FBK2/8

★★★★☆
(34 reviews)
Seller Price Buy
In Stock
$36.00
+Free shipping
Buy

* Pangoly may earn a commission when you use one of the links to make a purchase. (Disclosure)

* Product prices and availability are subject to change frequently. Any price and availability information displayed on Amazon at the time of purchase will apply.
Price Alert

$

Price alerts are not available for Amazon.

  • HyperX
  • HX424C15FBK2/8
  • is a kit of two 512M x 64-bit (4GB)
  • DDR4-2400 CL15 SDRAM (Synchronous DRAM) 1Rx8, memory
  • module, based on eight 512M x 8-bit FBGA components per
  • module.
  • Each module kit supports Intel Extreme Memory
  • Profiles (Intel XMP) 2.0.
  • Total kit capacity is 8GB. Each
  • module has been tested to run at DDR4-2400 at a low latency
  • timing of 15-15-15 at 1.2V.

Specifications Overview

Model HX424C15FBK2/8
Release Date August 2015

* First availability for purchase, it may not correspond to the actual market launch date.

Type 288-pin DIMM DDR4
Speed DDR4-2400 MHz
Size 8GB (2 x 4GB)
CAS Latency 15
First Word Latency 12.5 ns
Voltage 1.2 V
Heat Spreader
ECC Support
Color Black

RAM First Word Latency Table (nanoseconds)

Latency is measured in nanoseconds, which is a combination of frequency and CAS. Both frequency increases and latency decreases result in better system performance (when latency is the same, always prefer higher frequency if possible).

Frequency (MT/s)

2133 2400 2666 2800 2933 3000 3200 3300 3333 3400 3466 3600 3666 3733
13 12.19 10.83 9.75 9.29 8.86 8.67 8.13 7.88 7.80 7.65 7.50 7.22 7.09 6.96
14 13.13 11.67 10.50 10.00 9.55 9.33 8.75 8.48 8.40 8.24 8.08 7.78 7.64 7.50
15 14.06 12.50 11.25 10.71 10.23 10.00 9.38 9.09 9.00 8.82 8.66 8.33 8.18 8.04
16 15.00 13.33 12.00 11.43 10.91 10.67 10.00 9.70 9.60 9.41 9.23 8.89 8.73 8.57
17 15.94 14.17 12.75 12.14 11.59 11.33 10.63 10.30 10.20 10.00 9.81 9.44 9.27 9.11
18 16.88 15.00 13.50 12.86 12.27 12.00 11.25 10.91 10.80 10.59 10.39 10.00 9.82 9.64
19 17.82 15.83 14.25 13.57 12.96 12.67 11.88 11.52 11.40 11.18 10.96 10.56 10.37 10.18
20 18.75 16.67 15.00 14.29 13.64 13.33 12.50 12.12 12.00 11.76 11.54 11.11 10.91 10.72
21 19.69 17.50 15.75 15.00 14.32 14.00 13.13 12.73 12.60 12.35 12.12 11.67 11.46 11.25
22 20.63 18.33 16.50 15.71 15.00 14.67 13.75 13.33 13.20 12.94 12.69 12.22 12.00 11.79
23 21.57 19.17 17.25 16.43 15.68 15.33 14.38 13.94 13.80 13.53 13.27 12.78 12.55 12.32
24 22.50 20.00 18.00 17.14 16.37 16.00 15.00 14.55 14.40 14.12 13.85 13.33 13.09 12.86
25 23.44 20.83 18.75 17.86 17.05 16.67 15.63 15.15 15.00 14.71 14.43 13.89 13.64 13.39
CAS (clock cycles) Lower latency means faster memory.

Cheapest alternatives with equal or better performance

-1.83ns Latency

-0.62ns Latency

-2.50ns Latency

Description

JEDEC/XMP TIMING PARAMETERS

JEDEC/PnP: DDR4-2400 CL15-15-15 @1.2V

DDR4-2133 CL14-14-14 @1.2V

XMP Profile #1: DDR4-2400 CL15-15-15 @1.2V

• Power Supply: VDD = 1.2V Typical

• VDDQ = 1.2V Typical

• VPP - 2.5V Typical

• VDDSPD = 2.2V to 3.6V

• Nominal and dynamic on-die termination (ODT) for

data, strobe, and mask signals

• Low-power auto self refresh (LPASR)

• Data bus inversion (DBI) for data bus

• On-die VREFDQ generation and calibration

• Single-rank

• On-board I2 serial presence-detect (SPD) EEPROM

• 16 internal banks; 4 groups of 4 banks each

• Fixed burst chop (BC) of 4 and burst length (BL) of 8

via the mode register set (MRS)

• Selectable BC4 or BL8 on-the-fly (OTF)

• Fly-by topology

• Terminated control command and address bus

• Height 1.340” (34.04mm), w/heatsink



Compare Kingston HyperX FURY 8GB (2x4GB) 2400Mhz DDR4 with similar Memory




View more comparisons ►

x