Kingston HyperX FURY 8GB (2x4GB) 2666Mhz DDR4 CL13 RAM

Name: Kingston HyperX FURY 8GB (2x4GB) 2666Mhz DDR4 CL13
Brand: Kingston
SKU: HX426C13SBK2/8
Rating: 4.8 (5 reviews)

Kingston HyperX FURY 8GB (2x4GB) 2666Mhz DDR4 Non-ECC CL13 HX426C13SBK2/8

★★★★★

(5 reviews)

(Change region)

Seller	Availability	Price	Shipping	Buy
		-	-	Buy

* Pangoly may earn a commission when you use one of the links to make a purchase. (Disclosure)

* Product prices and availability are subject to change frequently. Any price and availability information displayed on Amazon at the time of purchase will apply.

HyperX HX426C13SBK2/8 is a kit of two 512M x 64-bit (4GB)
DDR4-2666 CL13 SDRAM (Synchronous DRAM) 1Rx8, memory
modules, based on eight 512M x 8-bit FBGA components per
module. Total kit capacity is 8GB.
Each module supports
Intel XMP (Extreme Memory Profiles).
Each module has
been tested to run at DDR4-2666 at a low latency timing of
13-14-14 at 1.35V.

Kingston HyperX FURY 8GB (2x4GB) 2666Mhz DDR4 CL13 image 1

Kingston HyperX FURY 8GB (2x4GB) 2666Mhz DDR4 CL13 image 2

Kingston HyperX FURY 8GB (2x4GB) 2666Mhz DDR4 CL13 image 3

Kingston HyperX FURY 8GB (2x4GB) 2666Mhz DDR4 CL13 image 4

Kingston HyperX FURY 8GB (2x4GB) 2666Mhz DDR4 CL13 image 5

Kingston HyperX FURY 8GB (2x4GB) 2666Mhz DDR4 CL13 image 6

Kingston HyperX FURY 8GB (2x4GB) 2666Mhz DDR4 CL13 image 7

Specifications Overview

Model	HX426C13SBK2/8
Release Date	September 2015 * First availability for purchase, it may not correspond to the actual market launch date.
Type	288-pin DDR4 DIMM
Speed	DDR4-2666 MHz
Size	8GB (2 x 4GB)
CAS Latency	13
First Word Latency	9.75 ns
Voltage	1.35 V
Heat Spreader	Yes
ECC Support	No

	Old Name	Current Name	Branding	Data Speed	Port
USB 2.0	USB 2.0	USB 2.0	Hi-Speed USB	480 Mbit/s	diverse
USB 3.0	USB 3.1 Gen 1	USB 3.2 Gen 1x1	SuperSpeed USB	5 Gbit/s	diverse
USB 3.1	USB 3.1 Gen 2	USB 3.2 Gen 2x1	SuperSpeed USB 10Gbps	10 Gbit/s	diverse
USB 3.2	USB 3.2 Gen 2x2	USB 4.0 Gen 2x2	USB4 20Gbps	20 Gbit/s	only USB-C
USB4	USB 4.0 Gen 3x2	USB4 1.0	USB4 40Gbps	40 Gbit/s	only USB-C
USB4v2	USB 4.0 Gen 4	USB4 2.0	USB4 80Gbps	80-120 Gbit/s	only USB-C

RAM First Word Latency Table (nanoseconds)

Latency is measured in nanoseconds, which is a combination of frequency and CAS. Both frequency increases and latency decreases result in better system performance (when latency is the same, always prefer higher frequency if possible).

Frequency (MT/s)

	2133	2400	2666	2800	2933	3000	3200	3300	3333	3400	3466	3600	3666	3733
13	12.19	10.83	9.75	9.29	8.86	8.67	8.13	7.88	7.80	7.65	7.50	7.22	7.09	6.96
14	13.13	11.67	10.50	10.00	9.55	9.33	8.75	8.48	8.40	8.24	8.08	7.78	7.64	7.50
15	14.06	12.50	11.25	10.71	10.23	10.00	9.38	9.09	9.00	8.82	8.66	8.33	8.18	8.04
16	15.00	13.33	12.00	11.43	10.91	10.67	10.00	9.70	9.60	9.41	9.23	8.89	8.73	8.57
17	15.94	14.17	12.75	12.14	11.59	11.33	10.63	10.30	10.20	10.00	9.81	9.44	9.27	9.11
18	16.88	15.00	13.50	12.86	12.27	12.00	11.25	10.91	10.80	10.59	10.39	10.00	9.82	9.64
19	17.82	15.83	14.25	13.57	12.96	12.67	11.88	11.52	11.40	11.18	10.96	10.56	10.37	10.18
20	18.75	16.67	15.00	14.29	13.64	13.33	12.50	12.12	12.00	11.76	11.54	11.11	10.91	10.72
21	19.69	17.50	15.75	15.00	14.32	14.00	13.13	12.73	12.60	12.35	12.12	11.67	11.46	11.25
22	20.63	18.33	16.50	15.71	15.00	14.67	13.75	13.33	13.20	12.94	12.69	12.22	12.00	11.79
23	21.57	19.17	17.25	16.43	15.68	15.33	14.38	13.94	13.80	13.53	13.27	12.78	12.55	12.32
24	22.50	20.00	18.00	17.14	16.37	16.00	15.00	14.55	14.40	14.12	13.85	13.33	13.09	12.86
25	23.44	20.83	18.75	17.86	17.05	16.67	15.63	15.15	15.00	14.71	14.43	13.89	13.64	13.39

CAS (clock cycles) Lower latency means faster memory.

Distribution of First Word Latencies for Similar RAM Modules

The histogram below shows the distribution of first word latencies (in nanoseconds) for all RAM modules of the same DDR type and frequency in our database. Each bar represents the number of modules that fall within a specific latency range. The highlighted bar indicates the latency of the currently selected RAM module.